| 供應商 | 北京汐源科技有限公司 店鋪 |
|---|---|
| 認證 | |
| 報價 | 面議 |
| 關鍵詞 | 漢高ABLESTIKJM7000導電膠 |
| 所在地 | 北京建國路15號院 |
9年
LOCTITE ABLESTIK JM 7000 die attach adhesive has been
formulated for use in high throughput die attach applications. This
material has been used successfully on rigid substrates with die sizes
up to 700 mils.
LOCTITE ABLESTIK JM 7000 has been approved by DESC and
Rome Laboratory for military products.
TYPICAL PROPERTIES OF UNCURED MATERIAL
Viscosity, HAAKE RV-20 Rotoviscometer, mPa·s (cP):
Cone 1o @ Shear rate 22 s
-1 9,000
Work Life @ 25°C, hours 8 to 16
Shelf Life @ -40°C (from date of manufacture), days 365
TYPICAL CURING PERFORMANCE
Cure Schedule
30 minutes @ 150°C
Suggested temperature cures are from 150 to 350oC. For
applications requiring higher electrical conductivity, a cure cycle of 15
minutes @ 300oC is recommended. Product properties will not be
reduced by subsequent post die attach thermal exposure, i.e.,
wirebond, and/or lid seal up to 370oC.
TYPICAL PERFORMANCE OF CURED MATERIAL
Die Shear Strength:
2 X 2 mm Si die, kg-f,
cured 20 minutes @ 150oC
Substrate DSS
Ag/Cu LF ≥5
Tensile Strength :
cured 30 minutes @ 300oC, MPa
After Cure After 1000 TC'C"
>17 >17
Radius of Curvature:
Si die on Alumina, meters
cured 30 minutes @ 300oC
Chip Size: ROC
15 x 15 mm > 5
漢高樂泰導電膠,楊浦厚膜漢高ABLESTIKJM7000導電膠
面議
產品名：漢高ABLESTIKJM7000導電膠,JM7000導電膠,漢高導電膠,樂泰導電膠
ablestik84-1A導電膠
面議
產品名：導電膠,耐高溫導電膠,84-1A導電膠,84-1LMI導電膠
豐都樂泰8303A導電膠
面議
產品名：樂泰8303A導電膠,芯片填充膠
湖南樂泰316-48灌封膠單組份灌封膠
面議
產品名：樂泰 316-48 灌封膠,單組份灌封膠
雙鴨山CRC70三防漆
面議
產品名：CRC 70 三防漆,透明保戶漆,絕緣防銹漆
豐都樂泰8390導電膠
面議
產品名：樂泰 8390 導電膠,環氧樹脂導電膠
張掖樂泰1400LMS-HD導熱膠帶硅膠導熱膠帶
面議
產品名：樂泰1400LMS-HD 導熱膠帶,硅膠導熱膠帶
內江樂泰3230導電膠導電銀膠
面議
產品名：樂泰 3230 導電膠,導電銀膠,環氧導電膠